Reset Operation - Casio NX-4000 Service Manual & Parts Manual

4. Remove the old battery and replace it with new one, making sure that the positive (+) side of the new battery
is facing up (so you can see it).
5. Replace the back-up battery holder and secure it by tightening its screw.
• Be careful that you do not over tighten the screw.
6. Replace the battery compartment cover.

RESET OPERATION

You can use either SECRET RESET or ALL RESET to initialize the NX Unit. ALL RESET deletes all data stored
in memory, while SECRET RESET deletes only the data stored in the secret drawer.
To perform ALL RESET
1. Switch power ON.
2. Open the battery compartment cover.
3. Press the RESET button with a thin, pointed object.
• At this time, the touch panel screen appears.
4. Tap the tip of the pencil icon as each one appears.
• When you tap the fourth pencil icon, the RESET screen appears.
Warning!
The next step deletes all data stored in the NX Unit's memory. Make sure that you really want to delete the
data before you continue!
5. Tap ALL RESET.
Note
• The message "ALL RESET? OK/ESC" always appears in English, regardless of the system language
setting.
6. Tap OK to reset the memory and delete all data or ESC to abort the reset operation without deleting
anything.
• After you tap OK, the system language screen appears.
7. Select the system language by tapping on the language you want to use, and then tap OK.
• After you select the system language, the Home Time screen appears.
8. Check the Home Time setting and make any changes that you want.
RESET button
— 5 —