Table of Contents
Advertisement
Chapter 2. Hardware Installation
2.1 The Front Panel
The LEDs locates on the front panel, they indicate the device's working status. For details, please
refer to LED Explanation.
LED Explanation:
Name
LAN
ADSL
ACT
Power
2.2 The Back Panel
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
RESET: There are two ways to reset the Router's factory defaults.
Method one: When the device is working, please press the reset button of the Router, keep
the reset button pressed down for more than five seconds and then wait for the router to
reboot.
Method two：Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
LAN: Through the port, you can connect the Router to your PC or the other Ethernet network
TD-8816B
Figure 2-1
Status
On
LAN port normal
Off
Connection on LAN port abnormal
Flash
Data transmitting or receiving on LAN port
Slow flash
Connection to telecom network is abnormal
Quick flash
Connecting to the telecom network
On
Connection to telecom network is OK
Flash
There is data transmitting or receiving on WAN
port
Off
No data transmitting or receiving on WAN port
On
Power OK
Off
Power fail
Figure 2-2
ADSL2/2+ Ethernet Modem User Guide
Indication
3
Advertisement
Table of Contents
