Buttons, Indicators & Leds - Biostar Z490GTA EVO User Manual

12V_LED: RGB LED Device (5050 SMD) Header
This header providers 12V power and RGB control pins for RGB LED Device (5050 SMD).
5V_LED1/ 5V_LED2: Addressable RGB LED Device (WS2818B) Header
This header providers 5V power and Data control pins for RGB LED Device (WS2818B).
Note
» Ensure proper pin connecting to your LED device, wrong connection may damage your LED device or
motherboard.
» The 12V_LED connector supports to 5050 RGB LED strips with the maximum power rating of 3A
(12V).
» The 5V_LED connector supports up to 300 LEDs WS2818B individually Addressable RGB LED strips
with the maximum power rating of 3A (5V).
» Please use the Vivid LED DJ software to control the LEDs. For detailed software setting information,
refer to chapter 3.3 .
2.8 Buttons, Indicators & LEDs
On-Board Buttons
Pin Cable Color Assignment
1
2
3
4
CL_CMOS_BTN:
Press the button 1~2 seconds to load the
BIOS defaults.
Reset:
Touch this button to reboot the system.
Power:
Touch this button to turn-on/off the
system.
Chapter 2: Hardware installation | 19
Z490GTA EVO
12V (Black) VCC12
G (Green) LED_GREEN
R (Red) LED_RED
B (Blue) LED_BLUE
Pin Assignment
1 VCC5
2 Data
3 N/A
4 GND