2.8 Buttons, Indicators & LEDs
Touch Buttons
Note
» ECO/SPORT mode buttons will only be available when running RACING GT Utility in Windows
environment.
Indicators
LEDs
Below LEDs are controlled by RACING GT program. Please refer to Chapter 3.3 for more detail
software setting.
18 | Chapter 2: Hardware installation
ECO Mode:
Enabled ECO mode, it allows you save energy by slightly
reducing system performance.
Sport Mode:
Enabled Sport mode, it allows you to maximize system
performance but may use more energy.
Reset:
Touch this button to reboot the system.
Power:
Touch this button to turn-on/off the system.
BIOS POST Code Indicator:
The indicator will show POST code while
booting. Please refer to Chapter 4.3 for all the
BIOS POST codes.
1. RGB LED Header
2. MOSFET Heatsink LED
3. on-board LEDs (x7)