Buttons & Leds - Biostar B350GT5 Manual

2.8 Buttons & LEDs
Touch Buttons
Note
» ECO/SPORT mode buttons will only be available when running RACING GT Utility in Windows
environment.
LEDs
Below LEDs are controlled by RACING GT program. Please refer to Chapter 3.3 for more detail
software setting.
18 | Chapter 2: Hardware installation
ECO Mode:
Enabled ECO mode, it allows you save energy by
slightly reducing system performance.
Sport Mode:
Enabled Sport mode, it allows you to maximize
system performance but may use more energy.
Reset:
Touch this button to reboot the system.
Power:
Touch this button to turn-on/off the system.
1. RGB LED Header
2. MOSFET Heatsink LED
3. on-board LEDs (x12)