Table of Contents
Advertisement
Blind Spot Monitor with Rear Cross Traffic
Alert (BSM w/RCTA)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the decision when to
change lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
Sequoia's blind spot. If a vehicle is detected, the driver will be alerted via the
outside rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the
vehicle is detected, the outside rear view mirror indicators flash.
Refer to the Owner's Manual for limitations and more details on this system before
attempting to use it.
TOW/HAUL switch
"TOW/HAUL" mode can be used when carrying or towing heavy loads. As fuel
economy is reduced while in "TOW/HAUL" mode, deactivating when driving without
a load is recommended.
Refer to the Owner's Manual for more details on this system before attempting to
use it.
Rear view mirror indicators
Buzzer (RCTA only)
System ON/OFF
31
Advertisement
Table of Contents
