Conventions; Chapter 2. Hardware Installation; Panel Layout; The Front Panel - TP-Link TL-R4299G User Manual

Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter
Ignores Ping packets from WAN or LAN ports
Supports firmware upgrade
Supports Remote and Web management

1.3 Conventions

Parameters provided in the pictures are just references for setting up the product, which may
differ from the actual situation.
You can set the parameters according to your demand.

Chapter 2. Hardware installation

2.1 Panel Layout

2.1.1

The Front Panel

The front panel of the TL-R4299G consists of several LED indicators, which is designed to
indicate connections. Viewed from left, the next table describes the LEDs on the front panel of the
router.
LED Descriptions:
Name Action
Not lit
Power
Lit up
Not lit
M1
Lit up
Not lit
M2
Lit up
Flashing
Not lit
WAN/LAN
Lit up
(Link/Act)
Flashing
Not lit
100M(WAN)
Lit up
Not lit
1000M(LAN)
Lit up
TL-R4299G Dual-WAN SMB Broadband Router User Guide
Figure 2-1
Description
The router is power off
The router is power on
The router works properly
The router has a hardware error
The router has a hardware error
The router has a hardware error
The router works properly
There is no device linked to the corresponding port
There is a device linked to the corresponding port but no activity
There is an active device linked to the corresponding port
The linked device is running at 10Mbps
The linked device is running at 100Mbps
The linked device is running at 10Mbps or 100Mbps
The linked device is running at 1000Mbps
2
M1 and M2 are
synchronously, the
restoring the factory
settings.
flashing
router is
default