TP-Link TL-R4299G User Manual page 33

ISPs. For example, you can specify some packets prior forwarding from WAN port 1, which
depend on specified source or destination IP addresses.
Enable/Disable WAN - Enable the WAN port you want to use, then click Save to make it
effective.
Additional IP Address dispatch rules - Enable the function and then make the dispatch
rules.
Backup - Click the button to backup the list files.
Upload - Click the button to upload an existed file. You can click Browse to locate the
specific file first, and then click the Upload List Files to complete the process.
Rules list - This table displays the current dispatch rules.
To add a dispatch rule:
Step 1: Click Add New button shown in Figure 4-13, you will see a new screen shown in Figure
4-14.
Step 2: Select the Rules select, protocol, Datagram Pass Policy and Transmit Path, enter IP
address and Port like the next screen shows.
TL-R4299G Dual-WAN SMB Broadband Router User Guide
Figure 4-13
27