Advertisement
Quick Links
MegaRAID
RAID Controller
Quick Installation Guide
Thank you for purchasing the MegaRAID
RAID Controller. Please take a few minutes to read this quick
installation guide before you install the controller. If you need
more information about any topic covered in this guide, refer
to the other documents on your MegaRAID Universal
Software Suite CD.
Note:
The BBU03 Battery Backup Unit (BBU) and the
TBBU03 Transportable Battery Backup Unit
(TBBU) can be used with the MegaRAID 320-2X.
For more information about battery backups, refer
to the MegaRAID Battery Backup Unit User's
Guide on the MegaRAID Universal Software
Suite CD.
M e g a R A I D 3 2 0 - 2 X R A I D C O N T R O L L E R
I N S T A L L A T I O N
Step 1
Unpack the Controller.
Unpack the controller in a static-free environment.
Remove it from the antistatic bag and inspect it
for damage.
If the controller appears to be damaged, or if the
MegaRAID Universal Software Suite CD is
missing, contact LSI Logic or your MegaRAID
OEM support representative.
Back up your data before you change your system
!
configuration. Otherwise, you may lose data.
CAUTION
®
SCSI 320-2X
®
SCSI 320-2X
The MegaRAID Universal Software Suite CD is
packaged with the MegaRAID 320-2X. The CD
contains utility programs, device drivers for
various operating systems, and the following
documentation:
• MegaRAID 320 Storage Adapters User's Guide
• MegaRAID Configuration Software User's Guide
• MegaRAID Device Driver Installation User's Guide
• Software license agreement
Follow these steps to install the MegaRAID 320-2X.
Step 2
Prepare the Computer.
Turn off the computer and unplug the power
cord(s) from the back of the power supply.
Remove the cover from the chassis.
Step 3
Review the Jumpers and Connectors.
Figure 1
shows the location of the jumpers and
connectors on the MegaRAID 320-2X. The
jumpers are set at the factory and you usually do
not need to change them.
Figure 1 MegaRAID 320-2X Board Layout
J2
J5
J1
J7
J19
J14
J17
J18
J6
U6
J11
J13
J12
®
Advertisement
Related Manuals for LSI MegaRAID SCSI 320-2X
Summary of Contents for LSI MegaRAID SCSI 320-2X
- Page 1 If the controller appears to be damaged, or if the MegaRAID Universal Software Suite CD is missing, contact LSI Logic or your MegaRAID OEM support representative. Back up your data before you change your system configuration. Otherwise, you may lose data.
- Page 2 The following table lists the jumpers and connectors on the Step 4 Check the Memory Module. MegaRAID 320-2X controller. Ensure that the memory is present and seated firmly in the DIMM socket. Item Connector Description Note: For more information about supported memory, Termination 3-pin header.
- Page 3 SCSI connectors (J7 and J14). For maximum Figure 3 SCSI Termination Example data throughput, use only Ultra320 SCSI devices. The MegaRAID 320-2X supports up to 15 Wide SCSI Terminator SCSI or Ultra320 devices per channel (14 devices per channel on storage systems with SAF-TE enclosures).
- Page 4 Find a list of LSI Logic Corporation’s U.S. distributors, international distributors, nor does the purchase, lease, or use of a product or service from LSI Logic convey sales offices, and design resource centers on the LSI Logic web site at: a license under any patent rights, copyrights, trademark rights, or any other of the http://www.lsilogic.com/contacts/index.html...