Normal Function - Akai ROCKY PARTY DJ-4308A User Manual

NORMAL FUNCTION

1. Be sure to switch off the power and to connect to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds until the speaker functions are connected.
3. Select an audio source by pressing the INPUT A key on the front panel to display AUX A, BT-A,
USB A. Press the INPUT B key on the front panel to display LINE, USB B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/- key on the remote
control to adjust the setting of the main volume,
the volume of INPUT A, turn the right push shot to change the volume of the INPUT B.
5. Press the MENU key on the front panel to display BASS, TREBLE, XDRIVE, AUTO, MAIN then
adjust the VOLUME knob to change music treble, bass, light mode and sound effect.
6. PHONES OUTPUT selection. Press the PHONES MODEL button on the front panel to display
INPUT A, INPUT B, or INPUT AB.
PHONES VOLUME adjustment. Press the PHONES MODEL button on the front panel to display
INPUT A or INPUT B or INPUT AB, then rotate the VOLUME/MULTI knob to adjust
the PHONES VOLUME of INPUT A or INPUT B or INPUT AB
7. Press the LIGHT button on the remote control or press the MENU button on the front panel to
display light mode, then press the VOLUME/MULTI knob to change the OFF, R, G, B, RG, RB, GB,
RGB, AUTO, DEMO light mode.
8. Press the MUTE key to mute, press it again to reset.
Press X DRIVE on the remote to turn on/off X-Bass effect.
LIGHT COLOR CONTROL FUNCTION
To control the light mode coming from the speaker panels by "Speaker" menu or "light model"
button on remote control
• R = red lights flash
• G = green lights flash
• B = blue lights flash
• RG = red and green lights flash
• RB = red and blue lights flash
• GB = green and blue lights flash
• RGB = red, green, and blue lights flash
• Auto = the various color combinations cycle through and flash.
• Demo = lights flash and change color as if they were responding to the beat of the music.
KARAOKE & GUITAR FUNCTION
1. Please turn off the microphone volume and adjust the volume gradually after inserting the
microphone.
2. Adjust the MIC.VOL knob on the front panel
3. Adjust the ECHO knob on the front panel
4. Adjust the GUITAR.VOL knob on the front panel
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
treble, bass. Then turn the left push shot to adjust
to change the microphone VOLUME.
to change the microphone ECHO.
to change the guitar VOLUME.
6
OPERATING