Akai ROCKY PARTY DJ-4308A User Manual page 7

BLUETOOTH PAIR AND CONNECT
• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth features on your phone or music player.
• Turn on and set this unit to Bluetooth mode. The flashing blue light BT on LED display indicates
it is in pairing mode.
• Set your phone or music player to search for Bluetooth devices.
• Select AKAI DJ-4308A from search results on your phone or music player.
• Select OK or YES to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey steady blue light indicates successful connection.
• Press the DISCONNECT key on the remote to disconnect the Bluetooth.
FUNCTION OF USB READER
USBAinterface
This unit has two USB jacks. Press the INPUT A key to select USB A, then you can insert a USB
to play music. Press the INPUT B key to select USB B, then you can insert the another USB to play
music.
Important: The USB port is intended only for data transfer only; other devices cannot be used
with this USB connection. The use of USB extension cords is not recommended.
IN ORDER TO PROTECT THE BATTERY
1. When the battery is powered mode, standby operation is invalid.
2. When the battery is low, the system prompts "LOW POWER", POWER lamp blinks.
3. When the battery is serious shortage, the system prompts "NO POWER", POWER lamp blinks.
After 1 minutes, the system to stop.
And the control panel has a red lamp, when the battery is enough, the lamp is normally turn on.
When the low battery, the red lamp blinks.
BATTERY DISASSEMBLY
1. Remove the screws on the rear panel.
2. Take out the battery.
3. Disconnect
1
7
OPERATING
2 3