Table of Contents
Advertisement
Safety Notes
EMC
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
This section provides safety precautions to follow when installing, operat-
ing, and maintaining the ACC/RTB-735R2/736R2.
We intend to provide all necessary information to install and handle the
ACC/RTB-735R2/736R2 in this Installation Guide. However, as the prod-
uct is complex and its usage manifold, we do not guarantee that the given
information is complete. If you need additional information, ask your Mo-
torola representative.
The ACC/RTB-735R2/736R2 has been designed to meet the standard
industrial safety requirements. It must not be used except in its specific
area of office telecommunication industry and industrial control.
Only personnel trained by Motorola or persons qualified in electronics
or electrical engineering are authorized to install, maintain, and operate
the ACC/RTB-735R2/736R2. The information given in this manual is
meant to complete the knowledge of a specialist and must not be taken as
replacement for qualified personnel.
The board has been tested in a Standard Motorola system and found to
comply with the limits for a Class A digital device in this system, pursu-
ant to part 15 of the FCC Rules respectively EN 55022 Class A. These lim-
its are designed to provide reasonable protection against harmful
interference when the system is operated in a commercial, business or
industrial environment.
The board generates and uses radio frequency energy and, if not
installed properly and used in accordance with this Installation Guide,
may cause harmful interference to radio communications. Operating the
system in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense.
If boards are integrated into open systems, always cover empty slots.
xi
Advertisement
Table of Contents
