Digital Transmission And Telemetry - RadioMaster TX16S User Manual

There are some caveats-if the script stops executing, you should never use Lua
model scripts to control any aspect of the model that might cause a crash. The reason
is that if the script tries to use too much CPU time or memory, it will be closed and it
will not run again when the model is selected.
"The Custom Scripts page is for mixed-type scripts that run continuously. These
scripts should be placed in the / SCRIPTS / MIXE / folder of the SD card.
There can be up to 9 custom scripts.
For script development and documentation, please refer to the OpenTX 2.3 Lua
Reference Guide:
https://legacy.gitbook.com/book/opentx/opentx-2-3-lua-reference-guide/details

4.4.11. Digital Transmission and Telemetry

Each value received via digital transmission is considered a separate sensor with
its own properties. Multiple identical sensor types can be connected, but the physical
ID must be changed. For example, a sensor for each battery in a 2-6S lithium battery,
or monitoring individual motor currents in a multi-motor model. Each sensor can be
reset individually with special functions.
Receiver Signal Strength Indicator (RSSI): The value transmitted by the receiver in
the model to the remote control, indicating the strength of the received signal. The
warning can be set to warn when it is below the minimum, indicating that you are in
danger beyond the flight range. Factors affecting signal quality include external
interference, long distances, poor steering or antenna damage, etc.
56