Mounting On A Pole - D-Link DAP-3666 Quick Installation Manual

3. Log in to the administration user
interface. The default login information is
Username: admin
Password: admin
Mounting
Sealing
Gland
Figure 4: LAN Port Waterproof Enclosure
1. Connect an Ethernet Cable to the
LAN1(PoE) port on the DAP-3666. Use
the LAN Port Waterproof Enclosures to
seal the ports.

Mounting on a Pole

Figure 5: Attaching the Mounting Plate
1. Secure mount base to the pole with the
two stainless tie back strap sets. Ensure
that the tie back is locked securely.
DAP-3666 Quick Installation Guide
Sealing
Nut
Figure 6: Mounting the Device
2. Align and slide the DAP-3666 down so
that the mounting plate securely locks to
the DAP-3666.
Mounting on a Solid Wall
Figure 7: Attaching the Mounting Plate
1. Use the mounting plate to mark the
location where to drill the holes in the wall.
2. Drill holes on the markings and place the
included anchors into the drilled holes.
3. Align and place the mounting plate on
top of the anchors and use the included
screws to secure the mounting plate to
the surface.
3