Table of Contents
Advertisement
Instrument cluster light control
To adjust the brightness of the instrument cluster lights, push the
switch.
The meters and display illuminate when
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The "ENGINE START STOP" switch is in IGNITION ON mode.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the high engine coolant temperature
warning light comes on. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
URBAN CRUISER_OM_OM52C63E_(EE)
2-2. Instrument cluster
Darker
Brighter
P. 493)
2
197
Advertisement
Table of Contents
