Fantech Ezifit EIE150 Installation Instructions

Fantech Ezifit EIE150 Installation Instructions

In-wall exhaust fan

Advertisement

Ezifit In-Wall
Exhaust Fan
CONTENTS & INSTALLATION INSTRUCTIONS
Contents:
Ezifit Fan EIE150
Installation Instruction
Fixing screws kit
Also available on request:
Flexible duct 150 dia. x 6m long
Internal ceiling exhaust grille
Duct Joiners
Y Piece
Three Speed Switch

Inspection:

Ensure the unit has arrived in good condition and that the impeller will spin freely

Installation:

1. Installation of this product should be carried out by appropriately qualified persons.
2. Determine position of fan on wall.
3. Prepare opening in wall 265mm high x 240mm wide.
4. Remove grille from fan by un-doing the grille retaining screw.
5. Position the fan in the opening with the retaining screw hole uppermost.
6. Use fan for template to mark and drill holes for fasteners provided.
7. Plug fan lead into supply. Fan will require a switch to be wired to an accessible area for the fan
operation.
8. Fix fan to wall with fasteners provided.
9. Test run the fan to ensure free rotation.
10. Refit grille and grille retaining screw.
Part No.INST-EIE150
Part Number
DUCT150-6M
RCG150
JOINER150
YP-150-150-150
DSS1-16
1 off.
1 off.
1 off.
07/07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ezifit EIE150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fantech Ezifit EIE150

  • Page 1 Ezifit In-Wall Exhaust Fan CONTENTS & INSTALLATION INSTRUCTIONS Contents: Ezifit Fan EIE150 1 off. Installation Instruction 1 off. Fixing screws kit 1 off. Also available on request: Part Number Flexible duct 150 dia. x 6m long DUCT150-6M Internal ceiling exhaust grille RCG150 Duct Joiners JOINER150...
  • Page 2 WARRANTY: Fantech Pty Ltd warrants products of its manufacture when not misused or neglected to be free of defects in workmanship and/or materials. Our obligation under this warranty is limited to repairing or exchanging F.O.B. factory, any part, assembly or portion found to be defective within one year from the date of commissioning but not to exceed eighteen (18) months from date of shipment from our factory.

Table of Contents