Vcr Functions; Playback; Recording And One-Touch Timer Recording (Otr) - Toshiba RD-XV48KE Owner's Manual

E3LG0ED_EN.book Page 81 Wednesday, April 30, 2008 11:52 AM

VCR Functions

Playback

VCR VCR VCR
1
Press [B ON\STANDBY] to turn on
the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR].
3
Insert a pre-recorded tape, then
press [PLAY B] to begin playback.
4
During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
5
Press [PLAY B] to resume playback.
6
Press [STOP C] to stop playback.
7
Press [OPEN\CLOSE A] to eject the
tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually,
press [PROG. G \ H].
Recording and One-touch Timer
Recording (OTR)
Basic Recording
VCR VCR VCR
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [PROG. G \ H] on the
remote control.
• There is a tape with a record tab in the unit.
Tape speed Recording / Playback Time
Type of tape E60 E120
SP mode 1 hour 2 hours 3 hours 4 hours
LP mode 2 hours 4 hours 6 hours 8 hours
1
Turn on the unit and insert a
recordable videotape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording mode using
[REC MODE].
• The desired recording mode is selected in SP
(standard play) or LP (long play) mode by
pressing [REC MODE].
4
Select the desired channel to record
using [PROG. G \ H] or
[the Number buttons].
5
Press [REC I] to start recording.
To temporarily stop recording or to resume it,
press [PAUSE F].
After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.
6
Press [STOP C] when the recording
is completed.
E180 E240
81
EN