Table of Contents
Advertisement
E3LG0ED_EN.book Page 24 Wednesday, April 30, 2008 11:52 AM
TV View Operation
The following operations are available while viewing
TV channels through this unit's tuner.
Selecting the TV Aspect Ratio
You can select the TV aspect ratio to match the
format of the programme you are playing back with
the unit and that of your TV screen (4:3 standard or
16:9 wide screen TV).
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER].
2
Select "Video" using [U \ D], then
press [ENTER].
3
Select "TV Aspect" using [U \ D],
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
4
Select the desired option using
[U \ D], then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
5
Press [SETUP] to exit.
Hint
If you have a standard TV:
• Select "4:3 Letter Box" for a full width picture
with black bars at the top and bottom.
• Select "4:3 Pan & Scan" for a full height picture
with both sides trimmed.
If you have a wide screen TV:
• Select "16:9 Wide".
Selecting the Audio Mode
You can switch between TV audio modes by pressing
[AUDIO D]. Each mode is indicated on the TV
screen.
• During reception of bilingual broadcasts
Mode
Audio output
Main
Main audio from both speakers
Sub
Sub audio from both speakers
Main /
• Main audio from the left speaker
Sub
• Sub audio from the right speaker
• If the programme does not have more than one
sound track, [AUDIO D] is not effective.
24
EN
TV Aspect
Video Out
Display on
the TV screen
Main
Sub
Main/Sub
Selecting the On-Screen Display
(OSD) Language
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER].
2
Select "Display" using [U \ D], then
press [ENTER].
3
Select "OSD Language" using
[U \ D], then press [ENTER].
4
Select the appropriate OSD language
using [U \ D], then press [ENTER].
OSD Language
✔ English
Français
Español
Deutsch
Italiano
Svenska
Nederlands
5
Press [SETUP] to exit.
Advertisement
Chapters
Table of Contents
