Other Functions (Vcr); Audio Output Selection; Recording A Dvd/Cd Disc - Toshiba SD-V295KU Owner's Manual

Other functions (VCR)

Audio output selection/

Recording a DVD/CD disc

Audio output selection
When playing a prerecorded VHS
Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be
heard through the speakers. Normally
set to the Hi-Fi stereo position, this
button can be set to the MONO position
if the stereo broadcast or videotape
audio is of poor quality. The "R" and "L"
positions allow the audio from the Right
or Left Hi-Fi channel to be heard over
both TV speakers. This button has no
effect when viewing a MONO videotape.
Each time when you press the button,
OUTPUT SELECTION display appears
on the screen for several seconds. Refer
to the chart below.
OUTPUT SELECTION
STEREO
L ch
R ch
MONO
30
2K10101A.indb 30 2K10101A.indb 30
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Duplicating a DVD or CD disc
You can record disc material in DVD, Audio CD, etc. onto a
Video tape with this DVD/VCR.
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
2
Press VCR DVD selector to select the DVD
mode.
The DVD mode indicator will light.
3
Press PLAY to start playback.
4
Press REC/OTR to start recording.
The DVD/VCR will change to the VCR
mode automatically and the playback
picture or sound will be duplicated on
the video cassette tape.
5
Press STOP when you finish recording.
If you wish to stop a DVD/CD disc,
press VCR DVD selector to change the
DVD mode, then press STOP.
Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
• When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
" " on the display window will flash.
• You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.
DISC IS COPY PROTECTED
VCR DVD
STOP
PLAY
SP/SLP
REC/OTR
AUDIO SELECT
00 : 00 : 00 SP
12/22/2006 5:12:01 PM 12/22/2006 5:12:01 PM