Blocking Channels; Unlocking Programs Temporarily - Toshiba REGZA 32HLV66 Operation Manual

Blocking channels

With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
To block channels:
1
Press Y and highlight the Locks menu icon.
2
Press b to display the PIN code entering screen.
3
Enter your four-digit PIN code and press T (- page 34).
4
Press b to highlight Channels Block and then press T.
Locks
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Front Panel Lock
New PIN Code
Navigate ENTER Select
5
Press BbC c to select the input for which you want to
change the rating limits and press T.
A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
6
Press Bb to highlight the channel you want to block and
press T, which puts an "5" in the box next to that
channel.
Channels Block
1
2
3
4
5
6
7
8
9
10
7
Repeat step 6 for other channels you want to block.
8
Highlight Done and press T.
To unblock individual channels:
In step 6 above, press Bb to highlight the channel you want to
unblock, press T to remove the "5" from the box, highlight
Done and press T.
Chapter 5: Using the TV's features
Off
Off
Off
Exit Back
EXIT MENU
ANT 1
ANT 1
Allow All
Block All
Cancel
Done
To block all channels at once:
Highlight Block All in step 6 at left, and then highlight Done
and press T.
To unblock all locked channels at once:
Highlight Allow All in step 6 at left, and then highlight Done
and press T.
Channels Block
1
2
3
4
5
6
7
8
9
10

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
Press W.
2
Enter your four-digit PIN code and press T. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Locks
Enter PIN code to temporaily un-
* * * *
Cancel
ANT 1
ANT 1
Allow All
Block All
Cancel
Done
Active
block.
Done
37