To Memorize Channels - Toshiba MW27H62 Owner's Manual

memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit's memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
÷
Press MENU in the TV mode, then press < or
• to select opt=on.
SETUP
0 i i
_>_, ,i_
Press • or • to select "TV/CABLE'.
Press MENU repeatedly until the menu screen is cleared.
M_t_U
SETUP
©
Note:
You cannot select "TV/CABLE" and "CR PROGRAM" features if
you set the channel to "VIDEO1 ", "VIDEO2" or "ColorStream".
Press MENU in the TV mode, then press < or
• to select option.
MENU
S_rUP
0
Press • or • to select "CH PROGRAM".
Press • to start "CH PROGRAM".
The unit will begin memorizing all the channels
available in your area.
(Analog tuning)
4
5
(Digital tuning)
When channel programming is complete, the
message "COMPLETED" appears.
Press CH A or v to view the programmed
channels.
28
5V 0101A [E]p23-29
÷
2/22/06, 6:14 PM
÷