Using The Flexible Shaft; Maintenance And Cleaning - Westfalia 83 72 29 Instruction Manual

4. To adjust the rotation speed press the "+" button (3). Similarly, the rotation
speed can be decreased with the "-" button (4) in steps of 1000
revolutions/min. The rotation speed can also be adjusted while the machine is
running.
5. The correct way to hold the machine is to grip the casing towards the nose
firmly with thumb and index finger, just like holding a pen. Take care not to
cover the ventilation slots on the side cover of the machine. A whining noise
before start up is normal and no reason for concern.

Using the flexible Shaft

1. Unscrew the ending cap (10) from the front side of the tool.
2. Screw the threaded end of the flexible shaft (7) onto the tool.
3. Insert the desired tool bit into the tool holder of the flexible shaft.
4. Insert the locking tool (9) into the locking hole (8) of the flexible shaft.
5. Use the supplied wrench (N) to fasten the locknut of the tool holder of the
flexible shaft to fix the inserted tool bit.

Maintenance and Cleaning


First pull the power plug before cleaning the drill and milling machine.

Use a brush or similar to clean the ventilation slots.

Use a dry or slightly moist cloth to clean the machine. Do not use aggressive
chemicals such as bleach or solvents such as petrol to clean the machine.

Never immerse the machine in water!

Store the drill and milling machine in a dry location and protect it from dust
and dirt.
Using
10