Display Assembly - HP ENVY 17 Maintenance And Service Manual

Display assembly

Table 5-13 Display assembly descriptions and part numbers
Description
Display assembly, FHD, natural silver finish nontouch
Display assembly, UHD, natural silver finish, nontouch
Display assembly, FHD, nightfall black finish, nontouch
Display assembly, UHD, nightfall black finish, nontouch
Display assembly, FHD, nightfall black finish, touch screen
Display assembly, FHD, natural silver finish, touch screen
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
To remove the display assembly:
1. Remove the WLAN antennas and webcam cable from the clips and channel in the right speaker and
computer (1).
2. Remove the display panel cable from the routing channel in the left speaker (2).
3. Disconnect the display panel cable on the right side (3) and remove the cable (4).
4. Remove the two Phillips M2.0 × 3.0 screws (1) from each hinge.
5. Open the display to open the hinges (2).
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 32).
Spare part number
L87972-001
L87973-001
L92495-001
L92496-001
L92494-001
L87971-001
29).
30).
Component replacement procedures 51