HP ENVY 17 Maintenance And Service Manual page 47

IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do
not touch the components on the memory module. Do not bend the memory module.
To install the memory modules:
1. Align the notched edge of the memory module with the tab in the memory module slot (1).
2. Press the module into the slot until seated (2).
3. Gently press down on the module edges until the side retention clips snap into place (3).
To replace the memory cover, insert the edges to the cover into the clips on the system board.
Component replacement procedures 39