Huawei FusionModule2000 Installation Manual page 164

FusionModule2000 Smart Modular Data Center
Installation Guide
By default, clamp the clasps into the two holes in the middle. In actual conditions, you can select holes
as required.
Figure 11-7 Installing a partition plate
Step 6 Install adjacent cable troughs in the same way.
Step 7 Rotate the interconnecting lever and clamp it into the clasps until the lever is horizontal. This
operation interconnects the cable troughs.
Figure 11-8 Installing an interconnecting lever
(1) Interconnecting lever
Step 8 Install the cable trough above the rear door in a similar way.
----End
Issue 02 (2018-03-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Installing Cable Troughs and Cable Trays
155