Led And Buzzer Check; Switch On – Check Leds Light And Buzzer’s Sound - Whirlpool G0 Manual

Trouble Shooting

LED and buzzer check

SWITCH ON – Check LEDs light and Buzzer's Sound
ACTION:
Plug in the appliance to the mains, energizing it.
INDICATION:
All the segments and decimal dots of the displays and all the LEDs present in the USIF will be
switched ON for two seconds and then switched OFF. Subsequently the buzzer will beep once for
1 second.
ACTION:
Here can be verified if all the lights are ON and if the buzzer is beeping!
©
Service Competence Center