Failure Type 3 - Whirlpool G0 Manual

Troubleshooting
Type of failure codes

Failure type 3

comes from the USIF. These failures do not allow
the user to utilize the whole cook-top. When this
type of failure occurs than USIF switches OFF all
the burners present on the cook-top sending down
power levels equal to zero, and it becomes
insensitive to subsequent changes of settings on
the whole cook-top. If the user presses the buttons
F31
related the zones then a Long_beep is emitted.
Every failure type 3 concerns the whole cook-top. It
is shown on all the displays. Supposing to have the
error coded with F31, it will be shown intermittently
an "F F F F", a "3 1".
(See pictures below - Each frame is showed for one
second on the USIF)
©
Service Competence Center