Table of Contents
Advertisement
Installation
Electrical connection (hob)
A mains cable is delivered with the
cooktop.
On hob side:
L1, L2 and N1, N2 = VHR connectors
Earth connection = crimp contact
On house side:
L1 and L2 are clamped together in one
cable end sleeve.
N1 and N2 are clamped together in one
cable end sleeve.
In order to allow using the cooktop with
1 phase 230V.
If the cooktop will be connected with 2
phase, the life connection (L1, L2) have
to be cutted and connected one by one.
SC:4810 106 19175 = 1.5m (5x1.5mm²)
SC:4810 106 38939 = 2.5m (5x2.5mm²)
©
Service Competence Center
Advertisement
Table of Contents
