Maintenance Guidelines - Elation CUEPIX 16IP DTW User Manual

M A I N E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY
MAINENANCE!
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an
extended life. The frequency of cleaning depends on the environment in which the fixture
operates: damp, smoky, or particularly dirty environments can cause greater accumulation
of dirt on the fixture's optics. Clean the external lens surface at least every 20 days with a
soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINENANCE
Regular inspections are recommended to insure proper function and extended life. There
are no user serviceable parts inside this fixture, please refer all other service issues to an
authorized Elation service technician. Should you need any spare parts, please order
genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
A detailed electric check by an approved electrical engineer every three months to make
sure the circuit contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall
out during normal operation, resulting in damage or injury as larger parts could fall.
Check for any deformations on the housing, color lenses, rigging hardware and rigging
points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to
enter the fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall
and seriously injure a person or persons.
Electric power supply cables must not show any damage, material fatigue, or sediments.
NEVER remove the ground prong from the power cable.
8