Table of Contents
Advertisement
Programmable functions
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a laundry tub or trough.
– where the drainage pipes do not
comply with DIN 1986.
Options
= Suds cooling is switched off
(factory default setting)
= Suds cooling is switched on
76
Anti-crease
The Anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
At the end of the programme, the drum
continues to turn at intervals for up to
30 min. The door can be opened at any
time during the Anti-crease phase.
Options
= The Anti-crease function is
switched off (factory default
setting)
= The Anti-crease function is
switched on
Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
It will change as soon as a different
setting is chosen.
Options
= darkest level
= brightest level
= factory default setting
Hide quick links:
Advertisement
Table of Contents
