Pin Code; Control Panel Standby Status - Miele WWD 320 Operating Instructions Manual

 PIN Code
The PIN code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = PIN code is switched off
(factory default setting)
 = PIN code is switched on
Using the washing machine with a

PIN code

The code is 125 and cannot be altered.
 Switch on the washing machine.
   appears in the time display and
the  and  sensors light up.
 Touch the  sensor.
   appears in the time display.
 Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number
using the  and  sensors.
 Enter the second and third numbers
and confirm the numbers with the
Start/Add laundry sensor.
The lock is released and a wash
programme can now be selected and
started.
Programmable functions
 Control panel standby
status
To save energy the time display and
sensors will go out after 10 minutes,
and only the Start/Add laundry sensor
will flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washing machine is switched
on

= On (factory default setting)
The time display and sensors
will switch off after 10 minutes
if the programme is started.
However; the time display and
sensors will remain lit up for
10 minutes after a Delay start
time has elapsed, after the end
of a programme, or at the end
of the Anti-crease phase.
73