Ipt1020-Sd Function Settings - Toshiba DKT User Manual

Action
4. Registering
to BIPU
5. Registering
completion
- normal
action.

IPT1020-SD Function Settings

These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
1. Press + + +
2. Press then
3. Press the Feature Buttons to turn the LEDs On/Off (see
Table 16 IPT1020-SD Function Settings
FB
FB1
Buttons beep.
Speakerphone/Microphone sensitivity
FB3
is lower.
Enable handset Busy Override (BOV)
FB4
tone.
Turn LED On if carbon headset is
FB11
attached.
4. Press
5. Go off-hook and hang up.
Strata CTX DKT/IPT Telephone
LCD Indication
Registering IPT
LCD data is indicated from
CTX. Example:
NO. 205
FEB 28 THURSDAY 01:09
(simultaneously).
.
LED ON
to set the above data.
10/03
Remarks
When registering fails, IPT retries by starting at
Step 2 again.
Error message:
"Exxx" is error
number.
Buttons do not beep.
Speakerphone/Microphone sensitivity is
normal.
Disable handset BOV.
Turn LED Off if carbon headset is not
attached.
IPT1020-SD Settings
IPT1020-SD Function Settings
Registering IPT
Can't register IPT:EXXX
Table 16).
LED OFF
97