Soft Keys - Toshiba DKT User Manual

Advanced Operation

Soft Keys

Soft Keys
When Soft Keys are on, they replace the functions on the
phones and the IPT1020-SD.) The following table defines Soft Key Prompts.
Table 1
Soft Key
ABR
ACB
BUSY
CONF
EXEC
EXIT
JOIN
LINE
MESG
OVRD
PGE
RING
RLS
RTRN
STA.
TALK
TRNS
20
buttons below the LCD. (
Soft Key Prompts
Definition
Activates Automatic Busy Redial after dialing a busy outside telephone number.
Activates Automatic Callback after reaching a busy station, CO line, or CO Line
group.
(Busy Override) Sends a call-waiting tone to a busy station.
Initiates or completes a conference.
(Executive Override) Breaks into the conversation of a busy called station.
Exits you from a conference; remaining parties are connected.
Joins all parties to a conference while on a conference call.
Adds a CO line to an existing call while in the Conference mode. The LCD prompts
you to access a CO line after you press this key.
Sets a message waiting indication at a busy or unanswered station.
Overrides options, busy mode, or overrides Do Not Disturb mode.
Enables you to enter a Page Group number (01~16).
Makes a called station ring when making a voice announce call to the station.
Disconnects a call and returns telephone to the idle state.
Terminates a feature operation and to return to a previously displayed state.
Adds a station to an existing call while in the Conference mode. The LCD prompts
you to dial a station number after you press this key.
Makes a voice announcement to a called station that is ringing.
Initiates or completes a Transfer while on an outside call. Press once for an
immediate or announced transfer, depending on system programming. Pressing
TRNS again completes the transfer.
,
is a future feature for DKT3000-series
Strata CTX DKT/IPT Telephone
, and
10/03