Toshiba DKT User Manual page 105

IPT1020-SD Settings
This chapter explains how to enter data for your IPT1020-SD telephone if it was not
previously entered by the telephone installer or if you need to change this information.
You may also need to ask your Telephone System Administrator for the information
required for the following steps (IP address, subnet mask number, router address,
Station ID, CTX Strata Net node number, IP address for the BIPU-M1A, etc.).
Notes
You may want to enter a period or backspace when performing the following steps.
While in telephone programming mode (Press + + +
enter programming mode), you can use these buttons for the following functions:
• Press
• Press
• Press
Strata CTX DKT/IPT Telephone
to enter a period.
M to backspace.
to cancel entry and start over.
10/03
C
(simultaneously) to
91