Page 2
38 698 38 699 Bitte diese Anleitung an den Benutzer der Armatur weitergeben! Please pass these instructions on to the end user of the fitting! S.v.p remettre cette instruction à l'utilisateur de la robinetterie!
The conformity declarations can be obtained from the following 3. Connect voltage supply, see Fig. [18]. address: 4. Make settings. GROHE Deutschland Vertriebs GmbH Installing the plate, see Figs. [19]. Zur Porta 9 • Push the extension cable into the empty tube until the plug- D-32457 Porta Westfalica in connector no longer protrudes into the cistern.
Making settings Maintenance • Shut off water supply Setting mode • Switch off voltage supply The flow volume can be checked and changed in setting mode • Inspect and clean all components and replace if necessary (see Setting the flow volume). The detection zone of the fitting can be checked.
Fault/ cause/ remedy Fault Cause Remedy Indicator lamp on front • Obstacle during calibration - Perform calibration again, ensuring there of electronics flashing is no obstacle in the adjustment range of continuously after calibration the servo motor, see Maintenance, Calibrating the servo motor •...
Page 9
Middle East - Africa ✆ Area Sales Office: +48 22 5432640 ✆ ✆ +357 22 465200 Argent Sydney +30 210 2712908 b ro@grohe.com.pl ✆ info@grome.com +(02) 8394 5800 nsapountzis@ath.forthnet.gr Argent Melbourne ✆ ✆ +(03) 9682 1231 +62 21 2358 4751 OM UAE YEM ✆...