Plu Verifying Label - TEC SL-9000-ESB-X SERIES Owner's Manual

11. PROGRAMMING PROCEDURES

11.10 PLU VERIFYING LABEL

Menu Group: 1
Item No.:
PLU data stored in the scale are verified in the following procedure.
12
PROG.
CLEAR
To interrupt
label issue.
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the ENTER key is pressed.
3. Pressing the CLEAR key releases the scale from the error mode and returns to the initial status
of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
12
g
1 0
Set the individual PLU#. (Ex. PLU #100)
1
Set the block PLU#. (Ex. PLU #100~199)
1 0
Set the zone PLU#. (Ex. PLU #100~108)
ENTER
To resume label issue
which has been interrupted.
Set the entire PLU#.
0
NEXT
0 1
PLU
<MENU>
PROG.
Group 1
Main
ESC.
<MENU>
g
11-17
11.5 PLU VERIFYING LABEL
ENTER
The
confirmation
label is issued.
0 8