Procedure Before Operation - TEC SL-9000-ESB-X SERIES Owner's Manual

6. PROCEDURE BEFORE OPERATION

6. PROCEDURE BEFORE OPERATION
1. Unpack the accessories and scale from the carton.
2. Install the remote display on the scale. (See Page 7-1.)
3. Refer to safety Precautions in this manual and set up the scale in a proper location.
4. Load the label or receipt. (See Page 9-1.)
5. Be sure to insert the power cord plug into an AC outlet.
6. Adjust the level gauge. (See page 8-1.)
7. Turn the power on and then press the power key. (See page10-1.)
8. Set the following program menus:
Menu Group ITEM No.
1
1
If necessary, set the following program menus:
Menu Group ITEM No.
1
1
1
1
9. Either Key in a unit price or press the PLU key prior to calling up a PLU to be sold in weighing mode.
Place a weight on the platter to check a correct price is displayed.
10. The scale is ready to issue labels.
Programming Name
3 PRINT FORMAT
4 DATE/TIME SETTING
Programming Name
1 PLU DATA SETTING
11 INGREDIENT MESSAGE
2 ADDRESS SETTING
9 SPEED KEY SET
6-1
6. PROCEDURE BEFORE OPERATION