Download Print this page
Crux RVCFD-79 Manual
Crux RVCFD-79 Manual

Crux RVCFD-79 Manual

Rear-view integration interface for ford & lincoln vehicles 2011-up w/ myford touch radios

Advertisement

Quick Links

INTERFACING SOLUTIONS
FORD
2011 - 2014 Edge
2011 - 2014 Explorer
2012 - 2014 Focus
2013 - 2014 Focus ST (MUST Tap 12V Power for Camera from Reverse Light)
2013 - 2014 Taurus
2013 - 2014 Escape
2013 - 2014 F-150
2013 - 2014 F-150 Raptor
2013 - 2014 F-250
2013 - 2014 F-350
2013 - 2014 F-450
2013 - 2014 F-550
2013 - 2014 Fusion Hybrid
2013 - 2013 Fusion Energy
2013 - 2014 C-Max Hybrid
2013 - 2014 C-Max Energy
LINCOLN
2011 - 2014 MKX
2013 - 2014 MKS
2012 - 2014 MKT
Disclaimer:
Depending on the HW version of your MyFord Touch system, this product may not support
some older versions. Please contact us for more information.
PARTS INCLUDED
(1) FD-79 C-500 Interface Module
(1) FD-79 C-125 Interface Module
(1) FD-79 54-Pin T-Harness
(1) Instruction Sheet
TECH SERVICES
All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems or if
you have technical questions, contact us directly:
Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM)
Rev. 072214
REAR-VIEW INTEGRATION INTERFACE
FOR FORD & LINCOLN VEHICLES 2011-UP
W/ MYFORD TOUCH RADIOS
SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. We recommend disconnecting the negative side of the battery until ready to code the vehicle.
3. Do not install any of the main modules near any major components or near the HVAC system,
as placing items near the HVAC may cause damage or overheating to the vehicle or interface.
4. We recommend not disconnecting any of the air bag connections behind the dash panels.
5. This product is under Crux's 1 year manufacturer's warranty. Warranty may be voided in the case where
the device shows proof of being opened or improper extreme force.
Time
1
RVCFD-79
WORKS FOR:
FORD = SONY 8" RADIOS
LINCOLN = NON-SONY 8" RADIOS
This interface does not o er the
Force RVC feature.
NOTE:
Uninstall the RVCFD-79 before
performing a vehicle system re ash.
Reinstall the RVCFD-79 afterwards.
www.cruxinterfacing.com

Advertisement

loading

Summary of Contents for Crux RVCFD-79

  • Page 1 4. We recommend not disconnecting any of the air bag connections behind the dash panels. 5. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where the device shows proof of being opened or improper extreme force.
  • Page 2 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS INSTALLATION OVERVIEW DOES NOT REQUIRE YOU TO TAP FOR REVERSE SIGNAL TO FACTORY (SIGNAL IS FROM MODULE) DISPLAY 54-PIN 54-PIN SONY (male plug) (female plug) 8”...
  • Page 3 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS CONNECTING THE INTERFACE Follow these steps to properly install both the C-125 and C-500 interface modules. Step 1 - Remove the factory display to gain access to the factory 54-Pin connector.
  • Page 4 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS CONNECTING THE INTERFACE Follow these steps to properly install both the C-125 and C-500 interface modules. Step 3 - Connect both the C-125 and C-500 modules to their proper 8-Pin connectors on the provided T-Harness.
  • Page 5 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS CODING THE VEHICLE In order to activate the Rear-View Camera feature, the installer must CODE the car first. Step 5 - With the T-Harness and interface modules properly connected, turn the ignition to the “ON” position.
  • Page 6 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS CODING THE VEHICLE In order to activate the Rear-View Camera feature, the installer must CODE the car first. Step 7 - While listening to the FM Source, place dip switch number “2” to the “ON” position on the C-125 module only.
  • Page 7 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS CAMERA ACTIVATION AND INSTALLATION An easy way to test if the Rear-View Camera coding was completed correctly is to place the vehicle into Reverse gear.
  • Page 8 WHITE/ REVERSE HERE 12V OUTPUT RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS BLACK WIRE/ TAP 8-PIN ACTIVATING THE VIDEO IN-MOTION (male plug) There are several ways to activate the Video In-Motion, depending on the options available to the vehicle. This page will guide you through the known options available.
  • Page 9 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS DOES NOT REQUIRE YOU TO TAP FOR REVERSE SIGNAL ACTIVATING THE VIDEO IN-MOTION There are several ways to activate the Video In-Motion, depending on the options available to the vehicle. This page will guide you through the TO FACTORY known options available.
  • Page 10 RVCFD-79 REAR-VIEW INTEGRATION INTERFACE FOR FORD & LINCOLN VEHICLES 2011-UP W/ MYFORD TOUCH RADIOS INTERFACING SOLUTIONS COMPATIBLE RADIOS Rev. 072214 www.cruxinterfacing.com...