Input Button; Method - Toshiba TLP380 Owner's Manual

Projection on the screen (continued)
Remote control
ON /
STANDBY
5-a,5-b
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL / ADJ
ENTER EXIT
CT-90113
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
5-a,5-b 5-b
Select the input source to project.
There are two kinds of methods as follows (5-a and 5-b.)
5-a
Note
The types of input sources selected when the INPUT button is pressed repeatedly can be
set from the menu screen.
5-b
INPUT
5-b
INPUT
ENTER
ENTER
Select the input source by pressing INPUT
INPUT
repeatedly.
INPUT
At shipping from factory, "Analog RGB(1)" connected to
COMPUTER IN 1 connector or "Video" connected to VIDEO
Jack can be selected. (You can select "Camera" when using the
model with a document imaging camera.)
The icon and the name of the selected input source appear on
the screen.
45
Press INPUT and hold for two seconds.
The input source selection menu appears.
Select the input source to project with the
selection buttons ( / ).
Regardless of the contents of input source settings on the
menu screen, all the input sources are displayed here for
selection.
Press ENTER.
A picture of the selected input source is projected.
When a sound signal source is also connected, sound is
emitted from the speaker.
30
CONTENTS
Continued