Table of Contents
Advertisement
Projection on the screen (continued)
Remote control
5-a,5-b
INPUT
ON/STANDBY
LASER
AUTO
KEYSTONE
SET
L-CLICK
R-CLICK
VOLUME/ADJUST
5-b
MENU
ENTER
EXIT
PIP
FREEZE
RESIZE
CALL
MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
5-a,5-b
5-b
Select the input source to project.
There are two kinds of methods as follows (5-a and 5-b.)
5-a
Select the input source by pressing INPUT
INPUT
repeatedly.
At shipping from factory, "Analog RGB(1)" connected to
INPUT
COMPUTER IN 1 connector or "Video" connected to VIDEO
Jack can be selected. (You can select "Camera" when using the
model with a document imaging camera.)
The icon and the name of the selected input source appear on
the screen.
Note
The types of input sources selected when the INPUT button is pressed repeatedly can be
set from the menu screen.
45
INPUT
5-b
Press INPUT and hold for two seconds.
The input source selection menu appears.
INPUT
Select the input source to project with the
selection buttons ( / ).
Regardless of the contents of input source settings on the
menu screen, all the input sources are displayed here for
selection.
ENTER
Press ENTER.
A picture of the selected input source is projected.
ENTER
When a sound signal source is also connected, sound is
emitted from the speaker.
30
CONTENTS
Continued
Advertisement
Table of Contents
