Bulk Dump (Backing Up The Data); Connection Of Cp33 And Computer - Yamaha CP33 Service Manual

CP33

BULK DUMP (BACKING UP THE DATA)

It is possible to back up the data by sending the following System Exclusive Message (Bulk Request) to CP33.
(Note that it is possible to back up only setting data of the master function and not the function data.)
MIDI DATA: F 0 43 20 7F 05 33 00 00 F7
Explained here is the case where MIDI/audio sequence software "SQ01" and bulk out template (cp33-bulk.mid) are used as an
example. (SQ01 is supposed to be installed.)
Connection of CP33 and computer
* It is necessary to install USB-MIDI driver in order to connect the computer and CP33.
Download the USB-MIDI driver from the following URL.
http://www.global.yamaha.com/download/usb̲midi/
1) Turn on the power to CP33.
2) Open the control panel of the computer, click
40
F0: Exclusive Status
43: Yamaha ID
20: When received
7F: CP33 ID High
05: CP33 ID Low
33: Master Setting Address High
00: Master Setting Address Mid
00: Master Setting Address Low
F7: End of Exclusive
USB cable (A-B type)
USB connector
ZONE 1 ZONE 2 GRAND GRAND MONO
ON/OFF PIANO 1 PIANO 2 PIANO
MASTER
TEMPO CLICK CHURCH 1 JAZZ 2 HARPSI- 3
FUNCTION NO YES ORGAN ORGAN CHORD
MIN MAX MASTER EDIT TEMPO/OTHER VALUE 8 9 10
MASTER VOLUME ZONE CONTROL TRANSPOSE MASTER DEMO TEMPO/FUNCTION
CP33
E. CLAVI- VIBRA-
E. PIANO 1 E. PIANO 2 CHORD PHONE VARIATION
ROOM CHORUS
BRIGHT HALL 1 PHASER HARD
STRINGS/ 4 5 WOOD 6 7 MEMORY NORMAL HALL 2 TREMOLO MEDIUM
CHOIR GUITAR BASS E. BASS SPLIT MELLOW STAGE ROTARY SP SOFT
11 12 13 14
VOICE/MASTER BRILLIANCE REVERB EFFECT TOUCH LOCK PANEL
Computer with a USB interf
and make settings as shown below.
There should be no check mark for Thru ON/OFF.
USB connector