Selecting A Type Of Data Transmitted Via Midi [Transmitparameter]; Executing Song Data Bulk Dump [Songbulkdump]; Transmitting The Initial Settings On The Panel [Initialsetup]; Executing Voice Data Bulk Dump [Voicebulkdump] - Yamaha Clavinova CLP-970A Owner's Manual

MIDI [MIDI SETTING]
Selecting a type of data transmit-
ted via MIDI [TransmitParameter]
This parameter enables you to specify which MIDI
data the Clavinova can transmit.
See the procedure on page 66.
A
C
Select a type of data.
Type of data:
Note, Control, Program, Pitch Bend, SystemRealTime,
SysEx (System Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
Executing song data bulk dump
[SongBulkDump]
You can save current song data on the Clavinova as
MIDI bulk data by transferring it to a connected MIDI
data filer (such as an MDF3) or a sequencer. To play
back the saved song data, send the bulk data back from
the storage device to the Clavinova and follow the
usual playback procedure.
You can interrupt song data bulk dump transmission
by pressing the B [– (NO)] button.
See the procedure on page 66.
A
C
80
CLP-970A
You can transmit the panel data, such as voice selec-
tion, to a connected sequencer. Before you record per-
formance data to a connected MDF3 or sequencer, it is
useful if you first send and record (at the beginning of
B
the performance data) the panel setup data for your
performance during playback.
NO YES
See the procedure on page 66.
D
Select On or Off.
You can transmit the voice data specified in the "Voice
Setting" menu (page 72) as MIDI bulk data. You can
interrupt voice data bulk dump transmission by press-
ing the B [– (NO)] button.
See the procedure on page 66.
B
NO YES
D
Transmitting the initial settings
on the panel [InitialSetup]
A
C
Executing voice data bulk dump
[VoiceBulkDump]
A
C
B
NO YES
D
B
NO YES
D