Yamaha CP33 Service Manual page 42

CP33
5) Click REC
Once it is started, the cursor moves.
The bulk data is output and the block size changes.
When Block 1 is completed (the cursor has passed through), click STOP
(Pressing STOP again will cause the cursor to return to the start position.)
6) Save the data by another name. (Writing over will damage the template.)
Any format can be used but SMF format 1 is recommended.
7) To return the data to CP33, open the data saved by another name and click PLAY
During the process, the 7-seg. LED of CP33 displays "
(Do not turn off the power to CP33 during this time.)
When the operation is completed, the 7-seg. LED displays "
42
and then PLAY , and backing up of the data will be started.
.
--- ".
120 ".
.