Advertisement
S E T UP A N D I N STA L L AT I O N
Rotor Blades Assembly
It is important that only Kaiser Baas Sphire
Drone Rotor Blades are fitted to the Sphire
Drone. Never use any third-party accesso-
ries or tools.
Your Drone will come ready to fly with Rotor
Blades attached. If you need to replace
them, please refer to the following guide:
Disassembly
Remove the Rotor Blade by gently pulling up
and off the motor axis bar.
Assembly
Insert the Rotor Blade onto the motor axis
bar and push gently.
Only install the Rotor Blades to the corre-
sponding clockwise/anti-clockwise motor.
A letter is marked on each blade to indicate
which motor it should go on. Incorrect
installation will cause severe instability.
Refer to the diagram.
[WARNING] Never use Rotor Blades with
any signs of damage or wear and tear.
This includes chips, scratches and cracks.
Damaged Rotor Blades can cause the
Drone to fail in-flight and may result in
damage to persons or property.
[WARNING] Never touch the Drone or
the Rotor Blades when the motors are
spinning.
1 2 - E N G
Advertisement
