Installing The Strap - Canon 10x42L IS WP Instructions Manual

Installing the Strap

The strap is designed to hang on the neck in a specific direction. Install
the strap in a manner so that the Canon logo at the center of the strap
appears as in the illustration when the strap is hanging from the neck.
ENG-7
1
Install the eyepiece lens caps.
Install the eyepiece lens caps on the
z z
binoculars.
Put the strap through the strap hole in
z z
the eyepiece lens caps.
2
Fasten the strap.
Make sure that there is no slack and
z z
the strap does not loosen at the clasp
when you pull it.
3
Connect the objective lens caps.
Use the string included in the package
z z
to connect the objective lens caps to
the strap.