Using The Lens Caps; Installing The Strap - Canon 8x20 IS Instructions Manual

Table of Contents

Advertisement

Using the Lens Caps

Installing the Strap

When using the binoculars, check the condition of the strap (make sure
z
that the strap is securely installed, that it is not worn (damaged), etc.).
Detaching Eyepiece Lens Caps
Detach the eyepiece lens caps from the
z
eyecups when using the binoculars.
Attaching Eyepiece Lens Caps
Attach the eyepiece lens caps to the
z
eyecups after using the binoculars.
1
Fasten the strap.
Place one end of the strap through
z
the strap mount and then through the
clasp, which is attached to the strap,
from underneath.
2
Check the clasp.
Make sure that the strap does not
z
loosen at the clasp when you pull it.
ENG-6

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

10x20 is

Table of Contents