Starting The Recording - Monacor DVT-440SET Instruction Manual

4) Go to the next menu item "Overwrite record" with
the button and switch on or off the overwrite
mode with the button
mode activated, the oldest recordings are over-
written as soon as the memory card is full.
5) For time-controlled recordings go to the next
menu item "Schedule record" with the button
a) Press the button ENTER. For the start time,
the hours are selected. Adjust them with the
buttons and
b) Go to the minutes with the button
adjust them in the same way.
c) Repeat the procedure for the stop time.
d) On the right, next to the start time and stop
time, it is shown if the timer function is
switched on or off. If Off is shown, go to Off
with the button
button or .
e) Finally confirm the settings with the button
ENTER. Then it is possible to select another
menu item.
6) To format the memory card (e. g. prior to the
first use or to delete all recordings), go to the
menu item "Format card" with the button
a) Press the button ENTER. The following con-
firmation prompt is inserted:
Delete all data?
S
YES
b) If you do not wish to delete the memory card,
press the button ENTER to stop the proce-
dure.
c) To format and delete, select YES with the but-
ton or (displayed in green) and press the
button ENTER.
7) To exit the menu, press the button MENU.
If the screen shows the live picture of a camera, the
following symbols may be inserted according to the
adjustments:
symbol for the activated motion sensor
symbol for the overwrite mode
clock symbol when a time-controlled record-
ing is programmed
G
REC a video recording is made
a photo is taken
or . With the overwrite
.
and switch to On with the
NO

8.2 Starting the recording

1) Use the button
of the camera to be recorded or the quad picture
with all cameras. However, it is also possible to
activate the scan function via the menu item
"Preview mode" (chapter 6.1) in order to switch
to the picture of the next camera every 5 sec-
.
onds.
2) To start a video recording or to take a photo
(adjustable in the menu item "Record type"),
press the button REC (13).
and
While recording,
the file name of the recording, e. g.:
1-172256.AVI
Camera 1 – start of the video recording at
17 h 22 and 56 sec.
Q-220127.JPG
Quad picture with all cameras
Photo taken at 22 h 01 and 27 sec.
3) While recording, all buttons are locked, except
for REC and TALK (9). It is possible to terminate
a video recording with the button REC at any
time, even if it is time-controlled or started by a
motion detection.
or .
Notes
1. If the SD card symbol (d) is displayed in red and the
overwrite mode is deactivated [symbol
serted], no recording can be started. There is no suffi-
cient memory space on the card.
2. A video recording is automatically continued with a new
file after 10 minutes each.
3. It will take approx. 1 second to memorize a photo.
or (10) to select the picture
G
REC (j) or is shown and
(f) not in -
GB
21