Operating Modes; Time Settings; Program Settings - Regulus TP44 Installation And Operation Manual

Digital programmable thermostat
Table of Contents

Advertisement

3. LCD Display
Day
Program number
Operation mode
Low battery indication

4. Operating Modes

Keep pressed the middle of the circle
select heating mode (HEAT) or cooling mode (COOL), press

5. Time Settings

1. Press once the symbol
2. Press once the symbol
3. Press once the symbol
4. To confirm the changes, press
the operating mode set.

6. Program Settings

1. Press once the symbol PRG key, the weekday numbers will start flashing (1, 2, 3, 4, 5, 6, 7).
2. Use the + or – key to select a setting „1 2 3 4 5" or „6 7" (mode 5/2), „1 2 3 4 5 6 7" (7 days mode),
or gradually „1, 2, 3, 4, 5, 6, 7" (24h mode ).
3. Press the PRG key once, PRG1 will appear on the display and the time will flash, use the + and – keys
to set the first time of the desired program (in 10 minute increments).
4. Press the PRG key again, the temperature will flash, use the + and – keys to adjust the temperature
(in 0.5 °C increments).
5. Press the PRG key again, the display shows PRG and the time flashes. Repeat steps 3 and 4 until all
6 times and temperatures are set for Monday (selected day).
6. When the times and temperatures are set for Monday and 1 (Monday) is flashing, press the PRG key
again and repeat steps 2 to 4 until the desired times and temperatures for all 7 days are set.
7. Once the times and temperatures are set for all 7 days of the week, press the
or wait for 60 seconds before the values are accepted and the thermostat returns to its operating mode.
8. Press PRG repeatedly to scroll through the set parameters.
9. Default settings:
Day 1 to Day7:
PRG1: 6:00 20 °C
PRG4:14:00 15 °C
Set temperature
Time
Manual operation symbol
for 5 sec., that opens operating mode selection. Press + or – to
, until the day number starts flashing, using a + or – key select 1 to 7.
, until the hours symbol starts flashing, using a + or – key select from 0 to 23.
, until the minutes symbol starts flashing, using a + or – key select from 0 to 59.
or wait for 15 s for the values to be saved and the thermostat returns to
PRG2: 8:00 15 °C
PRG5: 17:00 21 °C
Cooling symbol
Heating symbol
Room temperature
to confirm.
key as confirmation
PRG3: 12:00 15 °C
PRG6: 22:00 15 °C

Advertisement

Table of Contents
loading

Table of Contents