Regulus TP08 Operating Instructions

TP08 Programmable Thermostat

Description

Programmable thermostat for control of heating or A/C. During operation, real room temperature is displayed as
well as time and day in a week, selected program, its graphic depiction, ON/OFF, temperature selection outside
the program and the selected temperature (economy – comfort). It offers a choice from 8 preset programs
(0-6 and 8) and 8 user-adjustable programs (10-16 and 18). Two temperature levels can be set (economy and
comfort) in the range 5-35°C. The program No. 8 is Antifrost, heating is turned on when the temperature drops
below 5°C and the measured temperature and dF (defrost) symbol blink alternately on the display.
1. display
2. program selector
3. time/day setting
4. save to memory
5. operation mode
6. battery compartment cover
7. control elements cover
graphic depiction

Recommended installation place

Operating instructions
day in a week
timej
manually set temperature
temperature
ON symbol
program number
symbol of the temperature selected
The thermostat is designed for
indoors usage only. It should be
placed on an inner wall about
150 cm above the floor, into a
suitable space where changes in the
room temperature can be registered
thanks to freely circulating air.
Do not mount above heat sources
(TV set, heater, fridge etc.),
to places exposed to direct
sunshine, draught, radiation from
instruments,nor to damp rooms.
1
EN
8. comfort temperature
9. economy temperature
10. reset button
11. adjusting buttons