Adjusting the picture
Using CableClear™ DNR (digital
noise reduction)
The CableClear digital noise reduction feature allows you to
reduce visible interference in your TV picture. This is useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing back a video cassette or disc damaged by
repeated use.
Note: The CableClear DNR feature does not function in DVI, ATSC,
digital Cable, VIDEO, and ColorStream modes.
To turn on CableClear DNR:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z to highlight the CABLECLEAR DNR field, and
then press • to select AUTO.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanently save the new settings, highlight SAVE and
press ENTER.
To turn off CableClear DNR:
Select OFF in step 3 above.
74
Chapter 8: Using the TV's features
(continued)
Advanced Settings
ALS
On
Flesh Tone
On
CableClear DNR
Auto
Color Temperature
Cool
Save
Done
Reset
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm, as
described below.
Mode
Picture Quality
cool
blueish
medium
neutral
warm
reddish
To select the color temperature:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z to highlight the COLOR TEMPERATURE field,
and then press • to select the mode you prefer (COOL,
MEDIUM, or WARM).
Video
Picture Settings
Theater Settings
Advanced Picture Settings
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanently save the new settings, highlight SAVE and
press ENTER.
Resetting the advanced picture settings
To reset the advanced picture settings to their factory values:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Highlight RESET and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
4. Highlight SAVE and press ENTER.
Advanced Settings
ALS
On
Flesh Tone
On
CableClear DNR
Off
Color Temperature
Cool
Save
Done
Reset
Advanced Settings
ALS
Off
Flesh Tone
Off
CableClear DNR
Auto
Color Temperature
Cool
Save
Done
Reset